Expert Answers about Chevrolet Exhaust Tips

• Which MagnaFlow Stainless Exhaust Tip Will Fit A Ford F-250 Super Duty Diesel
• The MagnaFlow 5 Inch Exhaust Tip - Stainless, Clamp-On for 3-1/2 Inch Tailpipe, part # MF35213, is a universal fit item. The exhaust tip will clamp-on to 3-1/2 inch tailpipe. You will need to measure the outer diameter of your tailpipe to see if it will fit your Ford F-250 Super Duty Diesel. The exhaust tip # MF35213 is 14-1/2 inches in length, so you will want to measure on your vehicle where it would clamp onto the tailpipe to see if there will be room for it to fit correctly. Most...
  view full answer...


• Compatibility of Magnaflow MF35239 Exhaust Tip with 5 Inch Diameter Exhaust Pipe
• The Magnaflow # MF35239 exhaust tip isn't a vehicle-specific item, it'll fit on any 5 inch diameter tailpipe. If that's the outside diameter of your exhaust pipe at the exit, this exhaust tip would work great for you. The tip is constructed from stainless steel for corrosion resistance and features a hardened enamel coating for superior durability. The exhaust tip is a clamp-on application with no welding required for installation.
  view full answer...


• Which Magnaflow Exhaust Tip Will Fit 2.1 Inch Exhaust On 1968 Ford F-100 Truck
• I spoke with our representative at Magnaflow and he informed me that the closest tip that is available to fit 2.1 inch exhaust is 2-1/4 inches. He informed me that you would need to have the tips installed at an exhaust shop, as they would need to either use a sleeve for the tip to fit tightly or flex the exhaust pipe out to 2-1/4 inches for the tip to fit correctly. The item you selected, MagnaFlow 3 Inch Exhaust Tip - Stainless, Clamp-On for 2-1/4 - 2-1/2 Inch Tailpipe, part # MF35208,...
  view full answer...


• Should I Keep My Normal Exhaust Tips Or Use A Resonated Tip
• A resonated tip like part # PM-5104 is basically a hollow tube that allows air to vibrate inside of it and makes your exhaust louder. It could cause your current exhaust set up to sound slightly louder but you probably won't notice much of a difference. If you like the way your exhaust system sounds now, I recommend to use a normal tip.
  view full answer...


• Clamp-On Exhaust Tips For 2016 Dodge Charger RT
• If you're not wanting to weld the tip on, I recommend getting a clamp on like the MagnaFlow 3" Exhaust Tip # MF35208. It's made of stainless steel, and will clamp onto pipes ranging from 2-1/4 to 2-1/2 inches in diameter. The MagnaFlow you're asking about # MF35212 won't fit because the band clamp will not connect the 2-1/4 inch diameter of your exhaust onto the end of the tip properly. If you're not against welding on a tip then get the MagnaFlow 4" Exhaust Tip # MF35126. It's the same...
  view full answer...


• How to Determine the Correct Bolt-On Stainless Steel Exhaust Tip for a 2009 Chevrolet Tahoe
• You will need to measure the overall diameter of the tailpipe on your 2009 Chevrolet Tahoe to select the correct tip. It would also help to measure the distance out that the exhaust tip would need to extend, so you could select a tip that is not too long or too short. I have provided a link to all of the clamp on exhaust tips we carry. Once you have the measurements for your Tahoe, you can click on the link, then on the right side of the page you can select the inlet size and length of...
  view full answer...


• Will a Resonator Exhaust Tip Make My Car Sound Louder
• Using a resonated exhaust tip such as part # PM-5104 would make the exhaust sound more crackly, for lack of a better term, than the stock exhaust and it might be slightly louder. A resonator exhaust tip causes the air to vibrate a certain way in a hollow cavity which produces a certain sound. If you want to keep the exhaust pitch the same then a tail pipe like part # MF35212 would be a better way to go. The width of the tailpipe will not noticeably change the sound of the exhaust system.
  view full answer...


• Does MagnaFlow Exhaust Tip # MF35146 Fit a Tailpipe With 2-1/2 Inch Inner or Outer Diameter
• Yes, you did order correctly, the MagnaFlow Exhaust Tip, part # MF35146, is designed to fit a 2-1/2 inch outside diameter tailpipe. The length of the exhaust tip is 18 inches, so you will also want to make sure the length will fit your vehicle. This is a weld-on exhaust tip, so professional installation is recommended.
  view full answer...


• How To Move Carpod Cargo Carrier Away From Exhaust Heat on SUV
• The exhaust melting cargo on a cargo carrier like the Carpod part # M2200 is not as common as you may think unless the cargo carrier is the exact same height at the exhaust or relatively close to it. We typically recommend at least 12 inches between the exhaust tip and the carrier to prevent melting. If you are experiencing excessive heat from the exhaust the best way to fix this is point the exhaust down with an exhaust tip. I recommend to use an exhaust tip that points away from the...
  view full answer...


• Could MagnaFlow Exhaust Tip # MF35235 Fit 2016 Dodge Durango
• Measure the outside diameter of the exhaust tips you have on your 2016 Dodge Durango. If they are 2-3/4 inches in diameter these would fit over and work well. They tighten with the included band clamp.
  view full answer...


• Will MagnaFlow Exhaust Tip MF35187 Fit a 2017 Chevy Silverado 3500 Diesel
• If the outer diameter of the exhaust pipe is 4 inches on your 2017 Chevy Silverado 3500 then you can use MagnaFlow exhaust tip # MF35187. This 4 inch model is the largest we have but there are smaller ones if your exhaust outer diameter is less than 4 inches.
  view full answer...


• Will the Bully Round Resonated Bolt-On Exhaust Tip Fit a 2002 Chevrolet Monte Carlo SS
• The correct Bully Round Resonated Bolt-on Exhaust Tip for a 2002 Chevy Monte Carlo SS with 2-1/4" exhaust pipes is part # PM-5104.
  view full answer...


• Weld-On Exhaust Redirect Exhaust Tip For a 2008 Ford Explorer or Taurus
• The Weld-On Exhaust Redirect, # MF35180, is designed to fit on a tailpipe that has a 3 inch outside diameter. You will need to measure the exhaust on your 2008 Ford Explorer and/or Taurus to determine what size the tailpipe is and if there is a long enough section exposed to install the tip. I have included a link to all of the exhaust tips we carry.
  view full answer...


• Will the Yakima Exo Cargo Carrier # Y62VR Work With 2009 Dodge Ram Laramie with Dual Exhaust
• Since the exhaust on your 2009 Dodge Ram Laramie points straight back, it is recommended to use exhaust tips to direct the exhaust flow downward or away from the the Yakima EXO Swing Away Enclosed Cargo Carrier - 2" Hitches - 10 cu ft - 100 lbs # Y62VR. The platform of this cargo carrier will sit close to your rear exhaust and at that distance, the heat from the exhaust could potentially damage the plastic of the cargo carrier. Your truck likely already has exhaust tips installed, if those...
  view full answer...


• Will Curt Hitch C13240 Work w/ Exhaust on 2020 Hyundai Tucson
• I took a look at your 2020 Hyundai Tucson Limited and it has two exhaust tips on the passenger side which will work fine with the Curt Hitch # C13240 as that's considered single exhaust by the manufacturer. The night edition has dual exhaust tips, one on each side of the car which causes the problems with the hitch fitting, and is the only fit exclusion.
  view full answer...


• Resonator Tips for 2000 Chevy Corvette
• It looks like your 2000 Chevy Corvette has a 2-1/2" diameter exhaust system so you'll want to use the Bully Round Resonated Bolt-on Exhaust Tip # PM-5104 which fits 1-3/4" to 2-1/2" diameter pipes. We have some other exhaust tips that fit 2-1/2" diameter pips that I'm linking for you to check out as well.
  view full answer...


• How to Make the Exhaust Louder on a 2017 Ford F-150
• The Bully Round Resonated Bolt-on Exhaust Tip part # PM-5104 has a resonated body which will provide a slightly more "crackly" sounding exhaust but adding just an exhaust tip to your 2017 Ford F-150 will not really make it any louder. As long as your factory exhaust piping is between 1-3/4" to 2-1/2" in diameter then the above exhaust tip will work well for you. In order to really increase the sound of your truck, you will want to install either a new muffler or cat-back exhaust system....
  view full answer...


• Will the Trailer hitch for 2011 Sorento SX AWD V6 Work With Dual Exhaust
• By dual exhaust, the Tech tip means exhaust pipes on both the driver and passenger side of the vehicle. If you have two exhaust tips exiting on the passengers side of the vehicle the Draw-Tite Class III Trailer Hitch, item # 75684 will work on your vehicle. All three of the trailer hitches for the 2011 Kia Sorento SX will fit models with the single exhaust only, no matter the engine size. The Draw-Tite model, item # 75684, is designed to fit only the single exhaust models (the cross...
  view full answer...


• Trailer Hitch for a 2010 Ford Flex with or without Dual Exhaust
• You are correct, dual exhaust is exhaust on each side of the vehicle, not a dual tip on just one side. But the hitch fits either style. The installation instructions for Curt trailer hitch # C13110 actually do mention dual exhaust. You have to scroll further down to the plain black and white version of the instructions to see the note which appears before step 1. The note says: The Ford Flex Ecoboost and the Lincoln MKT models have dual exhaust. Repeat instruction for passenger side. This...
  view full answer...


• Will a Resonated Exhaust Tip Change the Sound of my Exhaust
• A resonated exhaust tip such as the Bully Round Resonated Bolt-on Exhaust Tip part # PM-5104 causes the air to vibrate a certain way in a hollow cavity which produces more of a crackle sound. Though the sound of your exhaust will change it will not be by much.
  view full answer...